The Heavy Duty Nickel Plated Compression Fittings are used in our stainless steel misting applications. They are dual ferrule fittings designed to compress on hard tubing and hold without leaking. These fittings are compatible and rated for our 1000psi misting systems. Some of the key features of our 3/8" Nickel Compression Fittings include: Low torque assembly Positive leak-free seal assembly and reassembly Compatible with nylon, copper, and stainless tubing Dual ferrule design These fittings require 2 wrenches to secure the nickel compression ferrule to the tubing. Please pressure test the tubing when you are finished to check for leaks. If there is a leaky fitting, add a little more torque to the fitting for security and that will stop the leak. **Hint: the ferrules are loose inside the fitting; make sure not to take the nut off. Loosen the nut then push the tubing into the fitting until you feel it hit the center of the fitting. Tighten sufficiently to compress the ferrule onto the tubing. To see an example of how to seat the ferrule set properly, please click here.

Quick Overview:

Nickel Plated elbows make 90 degree connections between stainless steel or nylon.

• Type: Compression
• Construction Material:Nickel Plated
• Connects 3/8" Nylon or Stainless Steel Tubing
• 1000 PSI Rated

Assembly Instructions

1. Loosen the nut on the fitting.
2. Insert the tube into the fitting. Be sure the tube is bottomed on the fitting shoulder.
3. “Hand-tighten”. Then wrench the nut until it is snug and does not leak.

• Model Number: 54002-N
• Outdoor Cooling System Type: Fittings
• Hardware Material: Nickel
• Max Pressure: 1000 PSI