The enclosed pumps are upgraded to have both a 5 and 1 micron filters to add additional filtering to keep the nozzles clean from debris. The pump covers are also fitted with a sound dampening sheet to reduce the pump's noise level roughly 10db's over our direct drive models. The 110V pumps have a standard plug for your home outlet and garden hose adapter to fit your outdoor spigot for the water supply. We use a 3/8" compression fitting on the outlet of the pump to attach to high pressure nylon tubing. This pump is designed to be set on a level surface because it is filled with oil (We recommend to change the oil after every 500 hours of use). Our pumps are assembled with a normally closed solenoid valve to stop the water flowing through the unit when it is turned off. Other features that are standard on our pumps are high quality CAT pump, liquid filled pressure gauge, durable powder coat finish, on/off switch, and a 6 ft power cord.

Quick Overview:

Attn:  Pump assembly requires 3-5 days 

• 1000 PSI Pump Capacity:
  • 50-100 .008 Misting Nozzles
    
  • 37-75 .012 Misting Nozzles
    
  • 32-65 .014 Misting Nozzles
    
• 230/460 Volt 60Hz 8 Amps

Features:

• 1.5 HP TEFC Electric Motor
• Dual Filter
• Pressure Gauge
• Adjustable Regulator
• Energy Savings
• Low Noise Level
• Continous Duty
• Motor Overload Protection
• Three Phase
• CAT Pump Head
• Low Pressure Switch
• Relay

Specifications:

• Weight and Dimensions:125 lbs; L 18" W 16" H 13"
  
• Inlet Pressure Range:
  • (Standard): Flooded to 75 psi (Flooded to 5.25 bar)
    
  • (Hi-Temp): 30 to 75 psi (2.1 to 5.25 bar)
    
• Bore: 0.708" (18 mm)
  
• Max. Liquid Temperature:
  • (Standard): 160°F (71°C)
    
  • (Hi-Temp): 190°F (88°C)
    
  • Above 130°F call us for inlet conditions and elastomer recommendations.
    
• Crankcase Capacity: 11.15 oz. 
  
• Inlet Ports (1): 3/8” NPTF 
  
• Discharge Ports (2): 3/8” NPTF 
  
• By-Pass Ports (1): 1/4” NPTF 
  
  

• NPT Threading
• Powder Coated

• Model Number: 60200-HDE-3PH-230
• Outdoor Cooling System Type: Misting Pumps
• Pump Type: Enclosed Direct Drive
• Max Pressure: 1000 PSI
• Max Flow Rate: 2.10 GPM
• Max Power: 1.50 HP
• Voltage: 240/480 Volts